Channel Master
Channel Master
 Distribution Amplifiers
Channel Master
Channel Master
Rotor Upgrade Kit
Chimney, Wall & Eave Mounts
J Poles
Non-penetrating  roof mounts
Attic Mount
Coaxial Cable
Rotor Cable
HDMI Cables
Audio/Video Cables
Antenna Combiners
Signal Combiners
Coaxial Splitters
F Connectors
Ground Blocks
Wall Plates
A/B Switches
Coax Seal
Wire Ties
Crimp Tools
Satellite Accessories
 Antenna Tower
Rohn (Radian)
 Consumer Products
Digital Receivers
NTE Semiconductors
Security Systems
LED Flashlights
AC Inverters
Soldering Equipment
Heat Sink Compound
AC/DC Adaptors
Tool Sets
PTS Television Modules
Arrow Staples
Chipquik SMD Removal Kit



Model 1007IFD 22 Khz Satellite Signal Meter

with rechargeable battery and charger


The 1007IFD satellite signal meter has been designed for the installation

and maintenance of a satellite TV system. It features signal strength measurement by both meter and audible tone indication for dish peaking.

LNB voltage and current measurement is also provided.

An internal, rechargeable ni-cad battery pack with output switchable between  13v/22Khz and 18v/22Khz allows a dish antenna to be installed prior to the installation of the satellite receiver. The output voltage and 22Khz tone presence from a satellite receiver may also be monitored. The internal 22Khz generator allows alternate satellite selection on certain types of systems with an integrated LNB/multiswitch.


A 117VAC wall plug in charger is included.



Technical Specifications


  • Frequency range: 950-2150 Mhz
  • Impedance: 75 ohm
  • Sensitivity (per transponder):
    • -32 to +4 dBm 1 transponder
    • -41 to -5 dBm 8 transponders
    • -44 to -8 dBm 16 transponders
  • Insertion loss: 4dB
  • Indication: Analog panel meter (100uA FSD)
  • Acoustic Indicator: 0.2 to 5.0Khz
  • LNB Voltage Measurement: 0-25 VDC
  • LNB Current Measurement: 0-500mA
  • Ni-cad Battery Pack Output: 13v, 18v
  • Tone Output: 0.6v square wave, 22Khz
  • Tone Indicator: Requires >300mV, 18-24Khz
  • Battery Life: 3 Hrs. between charges
  • Wall Plug Charger Output: 24VDC 100Ma
  • Charging Time: 24VDC @ 60Ma for 12 Hrs.
  • Dimensions: 3.5 x 6.0 x 4.5
  • Weight: 36 oz.