|
|
| |
|
|
|
|
Rohn antenna towers for home or business
20G Tower The ideal tower for many
installations, Rohn 20G features: 1-1/4" steel tubing side rails (18 AWG wall) Completely hot-dipped galvanizing - AFTER fabrication! Proven design - Built on 12-1/2" equilateral triangle design Solid steel zig-zag cross members Uses Rohn 25G accessories
Price and availability subject to change without notice. Shipping extra. Tower must be shipped by truck freight. Please call for freight charges to your area.
Rohn 25G features: 1-1/4" steel tubing side rails (16 AWG wall) Completely hot-dipped galvanizing - AFTER fabrication! Proven design - Built on 12-1/2" equilateral triangle design Solid steel zig-zag cross members Specifications (PDF file)
Price and availability subject to change without notice. Shipping extra. Tower must be shipped by truck freight. Please call for freight charges to your area.
45G Communications Tower A true, multi-use structure for applications up to 300 feet. Rohn 45G features: 1-1/4" heavy steel side rails (14 AWG wall) Sleeve joined and double-bolted for extra strength Electrically welded joints Hot-dipped galvanizing AFTER fabrication Specifications (PDF file)
Price and availability subject to change without notice. Shipping extra. Tower must be shipped by truck freight. Please call for freight charges to your area.
Accessories
Important Information Height of tower and bracket uses: See appropriate Rohn catalog information. (Note: tighten the house bracket u-bolts only enough to prevent looseness. Do not dent or flatten the tower upright members by excessively tightening u-bolts.)
Miscellaneous: Installation is greatly hastened and simplified with the use of an erection fixture. Do not use it to lift more than the weight of one tower section at one time. Erection fixtures are not intended to be used for lifting individuals. If the antenna is to be fixed and a set screw used in the mast housing, or if a rotator is to be mounted on a short length of mast above the tower top section, install a TB50 tower bushing at the bottom of the mast housing to center the mast in the mast housing. These bushings are 'peened' into place. If the rotator is to be mounted inside the top section of the tower, do not install a TB50 tower bushing at bottom of mast housing. Anti-climb sections are recommended on all towers to prevent unauthorized persons from climbing tower. Towers are not to be used as ladders.
Caution: Be sure hinged bolts on hinged-type accessories are loosened before attempting to hinge tower up or down. Hinge no more than 40' of #45 tower, 30' of #25 or 25' of #20 tower only. All hinge-type bases are recommended to be used to raise tower only without antenna. When raising or lowering tower on any type of hinged base or hinge section, the loads applied for hinging the tower must be applied equally on both sides of the tower in order to reduce the possibility of twist on tower and hinges at the base. Special care must be taken to avoid the use of raising and lowering methods which may cause damage to tower or hinges. Hinged bases should only be installed and dismantled by professional and experienced installers. Our catalogs excludes roof installations. Local engineers must be consulted to determine adequate base and anchor details and wind loading criteria for all roof type installations.
Warren Electronics stocks 5 and 10 foot heavy-duty steel masts, telescoping masts in lengths of 20, 30, 40 and 50 feet, and heavy-duty steel tripods in 3, 5 and 10 ft. sizes, along with guy wire, grounding rods, coaxial cables, baluns, and antenna amplifiers - everything you need for a complete system installation!
Order/Inquiry Line M-F 7AM-5:30PM CST 1-800-397-5301
Price and availability subject to change without notice. Shipping extra. Call for freight charges to your area.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Questions or comments? E-mail us
|
